茅台镇酱香型白酒酿造环境中真菌菌群多样性分析

采用高通量测序技术结合数理统计软件分析方法，系统研究茅台镇酱香型白酒不同酿造轮次生产环境中的真菌菌群结构及特征。7 个轮次中共检测到4 个真菌门、212 个真菌属。根据各菌门、属的相对丰度，子囊菌门（Ascomycota）和担子菌门（Basidiomycota）是茅台镇酱香型白酒酿造环节中各酿造轮次的优势菌门，节担菌属（Wallemia）、复膜孢酵母属（Saccharomycopsis）为各轮次绝对优势真菌属。不同轮次环境样品中真菌组成结构的相似度较高，但其各轮次标志性真菌属存在差异。7 个酿造轮次共有相同真菌属56 个，在各轮次占主导地位，特征性真菌属在各轮次当中相对丰度和占比较小但种类丰富。Ascomycota最强节点为德巴利酵母属（Debaryomyces），Basidiomycota最强节点为红酵母属（Rhodotorula）。本研究揭示了茅台镇酱香型白酒不同酿造轮次环境中真菌菌群结构及其特征，为深入研究酱香型白酒酿造机理以及对酿造环境中微生物结构的解析提供了参考依据。     

Associations between indoor environment in residential buildings in wet and dry seasons and health of students in upper northern Thailand

We performed a repeated questionnaire study on home environment and health (six medical symptoms) in 1159 junior high school students (age 12.8 ± 0.7 years) in upper northern Thailand in wet and dry seasons. Data on outdoor temperature, relative humidity (RH), and air pollution were collected from nearest monitoring station. Odds ratios (OR) were calculated by multi-level logistic regression. Most common symptoms were rhinitis (62.5%), headache (49.8%), throat (42.8%), and ocular symptoms (42.5%). Ocular symptoms were more common at lower RH and rhinitis more common in dry season. Water leakage (28.2%), indoor mold (7.1%), mold odor (4.1%), and windowpane condensation (13.6%) were associated with all six symptoms (ORs: 1.3–3.5). Other risk factors included cat keeping, environmental tobacco smoke (ETS), other odor than mold odor, gas cooking, and cooking with biomass fire. Biomass burning inside and outside the home for other reasons than cooking was associated with all six symptoms (ORs: 1.5–2.6). Associations between home environment exposure and rhinitis were stronger in wet season. In conclusion, dampness-related exposure, windowpane condensation, cat keeping, ETS, gas cooking, and biomass burning can impair adolescent health in upper northern Thailand. In subtropical areas, environmental health effects should be investigated in wet and dry seasons.     

生物滴滤床法降解二氯甲烷废气的因素影响特征

二氯甲烷作为溶剂广泛应用于制药行业，其挥发性废气对人类健康和大气环境的危害极大。本文采用生物滴滤床对某制药厂浓度范围在0.02~2g/m³的二氯甲烷废气进行了为期132天的中试规模实验。在适宜的停留时间、温度、喷淋量和pH等实验条件下，控制适当的进气浓度可得到高效去除效率并且废气出口浓度达标。实验揭示了生物膜内生物降解是过程的限制因素，结果表明，在喷淋量为1200L/h、进气浓度范围为0.45~0.65g/m³时该生物系统去除效率最高可达98.9%，最大去除负荷可达EC_max=155.25g/(m³·h)。随着进气浓度的增加，去除负荷随之增大，而去除效率下降，废气出口浓度超标，表明生物滴滤系统已处于反应控制。此外，间歇实验表明，该生物系统具有良好的稳定性。指出生物滴滤床的设计、运行取决于当地的二氯甲烷废气排放标准。     

基于洪泽湖(泗洪片区)国考断面超标的入湖河流污染来源影响权重分析

为明确洪泽湖(泗洪片区)国考断面水质超标的污染来源,界定各行政区对洪泽湖的影响权重,建立洪泽湖水环境数学模型,模拟不同风向影响下洪泽湖的TN、TP浓度场,分析各主要入湖河流对洪泽湖的影响权重。根据各入湖河流内外源污染物量,利用污染影响权重计算方法,分析不同行政区对洪泽湖(泗洪片区)国考断面污染权重。计算结果表明,龙集镇北断面的污染来源受徐州市影响最大,占50%左右;成河乡断面污染来源受泗洪县、徐州市的影响较大,均占30%左右;对临淮乡断面影响最大的是泗洪县内部的污染,占40%左右。     

国际环境不确定下海外采矿权评估研究

在实物期权理论框架下,基于Black-Schole采矿权评估模型,提出了计量国际环境不确定性的方法以及将其纳入评估模型的途径,以此优化完善海外采矿权评估; 通过一实例验证了本文所述方法的可行性,并依据评估结果进一步分析了投资策略,最后对所提方法的可靠性进行了检验。研究结果显示: ① 采矿权价值来自于矿业权人对矿产资源的开采加工及具有灵活经营的权利,国际环境的不确定变化影响采矿权价值及投资策略。② 矿产品价格升高、价格波动率增加、驻在国矿业行业环境和国家环境变异程度的增加、矿山服务年限的增加,均提高了海外采矿权价值; 但矿产品价格下降、矿山服务年限减少将降低采矿权价值。③ 当矿产品价格持续处于低位时,项目应尽早建设或放弃; 而当价格处于增长或高位时,项目可适当推迟建设。④ 老挝矿业行业环境的变异程度大于该国国家环境的变异程度,前往老挝投资的矿企应重点关注该国涉及矿业投资的法律法规及政策,重点防范行业风险。⑤ 本文所提海外采矿权评估方法是可行、可靠的,具有一定实践意义。     

油气开采用钛合金石油管材料耐腐蚀性能研究

选取5种油气开发常用钛合金材料(Ti-6Al-4V、Ti-6Al-4V-0.1Ru、Ti-6Al-2Sn-4Zr-6Mo、Ti-3Al-8V-6Cr-4Zr-4Mo和Ti-5.5Al-4.5V-2Zr-1Mo)为研究对象,使用高温高压釜模拟国内典型严酷服役工况环境,研究了不同钛合金材料耐均匀腐蚀、局部腐蚀、点蚀、应力腐蚀开裂(SCC)及缝隙腐蚀的性能,通过使用扫描电镜和能谱分析等手段对腐蚀形貌和腐蚀产物进行了分析,并使用电化学方法对不同合金的耐腐蚀机理进行了研究。结果显示,在所测试工况条件下,所有钛合金材料腐蚀反应均为阳极控制过程,均匀腐蚀速率均低于0.001mm/a,并且对应力腐蚀开裂均有良好的抗力。Ti-6Al-4V和Ti-5.5Al-4.5V-2Zr-1Mo合金出现明显的点蚀和缝隙腐蚀问题。对腐蚀机理研究表明,在工况条件温度下,随着pH值的降低,所有钛合金均发生自腐蚀电位降低,极化电阻减小,腐蚀电流增大,耐腐蚀性能下降,其中Ti-6Al-4V耐腐蚀性能下降的最为明显,研究结果为油气开发工况下钛合金石油管的选材和缝隙腐蚀问题防治提供理论基础。     

A low pressure SWCNT-ENM sandwich membrane system for the removal of PPCPs from water

While carbon nanotubes are known as efficient adsorbents for removal of a number of contaminants from water, the possibility of their leaching into drinking water has prevented their application in water treatment. In this study, single walled carbon nanotubes (SWCNT) were sandwiched between two electrospun nanofibre membranes (ENM). The relatively small pore size of the ENM prevented the mechanically entangled nanotubes from passing through and contaminating the water. The performance of the SWCNT-ENM was evaluated in a lab-scale setup for the removal of PPCPs. For this purpose, a feed solution spiked with known concentrations of six PPCPs was passed through the membrane system. The target substances included acetaminophen (ACT), bezafibrate (BZF), iopromide (IOP), diclofenac (DCF), carbamazepine (CBZ), and sulphamethoxazole (SMX). The same test was also conducted using a single contaminant (ACT). Results demonstrated a decrease in the overall percent removal of PPCPs as feed flow rate and PPCP concentration increased. For multi-component feeds containing equal amounts of the aforementioned PPCPs, the overall percent removal decreased from 90.8% to 71.0% when increasing the feed concentration from 30 to 600 μg/L. Experiments using sandwiched powdered activated carbon (PAC) showed that the dynamic adsorption capacity of PPCPs by SWCNT-ENM was higher than that of PAC-ENM, and remained unaffected by the feed composition. In addition, the high porosity of this novel membrane allowed for flow of water with low resistance such that the trans-membrane pressure was found to be as low as 4 kPa at a pure water flux of 330 L/m²h.     

低压环境下航空电缆材料燃烧特性的研究

在高高原实验室(61 kPa、4 290 m)和广汉实验室(96 kPa、520 m),分别开展常低压条件下FXL型航空电缆的对比燃烧实验。通过热辐射加热箱、烟密度及成分测试仪和氧指数仪等设备,测量点燃时间、烟密度、质量损失速率和CO、CO2及O2等浓度变化。实验结果表明:在96 kPa和61 kPa两种实验环境下,低压下最小点燃时间及温度的数值更大,两者的温度和时间差分别为15℃和4.8 s;烟密度曲线快速升高后趋于平衡,61 kPa条件下的发烟量小于96 kPa;O2体积浓度随着加热时间先下降后升高,而CO2的变化趋势相反。在61 kPa条件下,CO曲线会出现双峰现象且更明显;随着氧浓度增加,质量损失速率加快且呈线性关系;压力因素对燃烧影响减弱且燃烧持续时间差值变小。研究结果揭示了低压环境对航空电缆的燃烧影响,为增强航空安全提供参考。     

Influence of heat treatment on corrosion behaviors of 316L stainless steel in simulated cathodic environment of proton exchange membrane fuel cell (PEMFC)

The influences of two types of heat-treatments on the corrosion behavior of 316L SS in the simulated cathodic environment of PEMFC, are investigated using potentiodynamic curve, electrochemical impedance spectroscopy (EIS), Mott-Schottky plot and auger electron spectroscopy (AES), respectively. The results show that 316L SS is in the passive state within the potential region from −0.1V_SCE to 0.8V_SCE in the simulated cathodic environment of PEMFC, and a passive film can be formed on 316L SS. The passivity of 316L SS in the simulated cathodic environment of PEMFC firstly increases and then degrades with the increased solid solution temperature or time, and the best passivity corresponds to the solid solution temperature at 1050 °C for 40 min among other solid solution treatments. While 316L SS heat-treated with the solid solution treatment at 1050 °C for 40 min plus aging treatment at 900 °C for 4 h, also has the best passivity in the same solution among other solid solution plus aging treatments. The best corrosion protection, lowest donor density and the highest thickness of the passive film corresponding to the solid solution temperature at 1050 °C for 40 min among other solid solution or solid solution plus aging heat treatments, and this treatment is mostly suitable for improving the anti-corrosion property of 316L SS in the simulated cathodic environment of proton exchange membrane fuel cell (PEMFC).     

基于热电效应的高效环控系统

部分空间科学实验对环境温度有较高的要求，环境温度高于或低于空间科学系统能够提供的热沉温度，需要有可靠有效的加温降温处理措施。使用可靠性强的热电制冷片作为制冷制热方式和气液换热器二次换热来实现环境温度控制的需求，并对不同流体温度制冷制热效果进行分析，结果表明流体温度和目标温度差越小，热电制冷制热的效果越好。在环境温度制冷工况中，热电单元数量随电流增加先减少后增加，在制热工况中则单调递减，设计中需按照制冷工况进行热电单元数量的确定。当流体温度接近制冷制热的目标温度时，会出现整个系统总效率优于热电系统效率的区间。通过对热电单元和气液换热器的组合系统的性能计算，提供一种适于热电环控系统的计算方法和部件选型思路，对空间站环控系统的设计有重要参考意义。